Installation Guide

PIECE QUANTITY

A 1X

B 2X

H1 4X

H2 12X

H4 4X

THE HARDWARE THAT IS NEEDED TO CONNECT THE HEADBOARD TO

THE BED FRAME IS INCLUDED.

WASHER

垫片

BIG CROSS BOLT

大螺杆

SMALL CROSS BOLT

DESCRIPTION

小螺杆

PICTURE

HEADBOARD

METAL LEG

NUT

螺母

CARE AND MAINTENANCE

Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a

complete overall cleaning.

The use of steam or water-based cleaners may cause excessive shrinking or staining.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during

assembly

* This item may require periodic tightening

Model# MCR4000's & MCR4600's Series Headboards

Part List and Hardware List

Product Dimensions: 61.41"W x 3.94" D x 54.33" H

PAGE 1
CARE AND MAINTENANCE Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. H3 H2 H3 H2 B Step 1 The hardware needed to connect the legs (B) to the headboard (A) are 4 big cross bolts (H3) and 4 washers (H2). A B Step 2 Attach the two legs (B) to the headboard (A) using 4 big cross bolts (H3) and 4 washers (H2).