Instructions / Assembly

ManualsBrandsSafavieh ManualsKitchenShayne Full Headboard in Taupe

PIECE QUANTITY

A 1X

B 2X

H1 4X

H2 12X

H3 4X

H4 4X

Step 1

Step 2

Step 3

Step 4

CARE AND MAINTENANCE

Spot clean using a mild water-free solvent. Only a professional cleaner should

undertake a complete overall cleaning.

The use of steam or water-based cleaners may cause excessive shrinking or staining.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish

during assembly

* This item may require periodic tightening

Part List and Hardware List

DESCRIPTION

PICTURE

BIG BOLT

大螺杆

SMALL BOLT

小螺杆

HEADBOARD

METAL LEG

NUT

螺母

The hardware needed to connect the headboard to the bed

frame are 4 small bolts (H4), 8 washers (H2), and 4 nuts (H1)

Attach the legs of the headboard (B) to the bed frame by

fixing them together through the 2 holes in the bed frame

and the vertical slot in the leg using 4 small bolts (H4), 8

washers (H2) and 4 nuts (H1)

THE HARDWARE THAT IS NEEDED TO CONNECT THE

HEADBOARD TO THE BED FRAME IS INCLUDED.

PREPARATION

ASSEMBLY INSTRUCTIONS APPLICABLE FOR ALL

SAFAVIEH HEADBOARDS.

THE DESIGN OF THE HEADBOARD IN THE DRAWINGS

MAY VARY FROM YOUR ACTUAL HEADBOARD, BUT

ASSEMBLY IS THE SAME ON ALL MODELS AND SIZES.

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and

hardware contents list.

If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 10 minutes.

Remove the legs from the back of the headboard. Attach the two legs (B) to the headboard (A) using 4 big

bolts (H3) and 4 washers (H2).

The vertical slots at the lower part of the leg must be

facing the outside of the bed.

WASHER

垫片

H1H2H2H4