Installation Guide

PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included):SPANNER.
Nuts has been kept on product itself, two spare nuts can found in hardware bag
Please do not fully tighten bolts/nuts until the end of step.
Periodically check all bolted connections to make sure they are tight and secure.
step1 step2
Conntect the side panels(C) to bottom
panels(D);Joint the top brackets(A) and (B) to side
panels (C) and connect the brackets together .
Attache the seat part (E) to the side panels (C) ,using
the nuts and spanner provided
step3 step4
Connect the bottom bar (F) to the bottom
panels (D),using nuts and spanner provided.
Hammer the gound stake (G) to the ground to reinforce
the arch.