Installation Guide

CARE AND MAINTENANCE

Do not use acids or alkaline cleaning agents. Sharp objects will damage and scratch

the surface. Wipe the surface with a soft, damp cloth

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish

during assembly

* This item may require periodic tightening

Model#PAT5011

Part List and Hardware List

Product Dimensions:68.5"W x13.75 " D x87.75" H

PIECE DESCRIPTION PICTURE QUANTITY

A Top left bracket 1x

B Top right bracket 1x

C Left pillar 1x

D Right pillar 1x

E Ground Stake 4x

F Nuts 6x

G Spanner 1x

PAGE 1
CARE AND MAINTENANCE Do not use acids or alkaline cleaning agents. Sharp objects will damage and scratch the surface. Wipe the surface with a soft, damp cloth NOTICE * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * This item may require periodic tightening Part List and Hardware List PIECE DESCRIPTION PICTURE Model#PAT5011 Product Dimensions:68.5"W x13.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tools Required for Assembly (included):SPANNER. Nuts has been kept on product itself, two spare nuts can found in hardware bag Please do not fully tighten bolts/nuts until the end of step.