Assembly Instructions

ManualsBrandsSafavieh ManualsOutdoor Lounge FurnitureAnaheim 5-Piece Dark Slate Gray Wood Patio Seating Set with Beige Cushions

Table Of Contents

Before beginning the assembly of the product, make sure all parts are present.

Compare the parts with the package contents list and hardware contents list.

If any parts are missing or damaged, do not attempt to assemble the product.

Tool required for assembly (included): Allen Key.

Step 1: attach right side (D) to the back (A). Then attach

support L (E) and support S (F) to the right side (C) as shown

on the picture by using the Allen Bolt (H1) and tighten with the

Allen Key (H4). Continue with the left side (C) in the same way.

Make sure to tighten all bolts (H1) before you continue with step 2.

PREPARATION

Step 2: put the seat (B) inside the chair as shown on the picture

and use the screws (H2) to attach it to the chair by using

a screwdriver .

Summary of content (4 pages)

PAGE 1
PREPARATION Before beginning the assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any parts are missing or damaged, do not attempt to assemble the product. Tool required for assembly (included): Allen Key. 1 2 Step 1: attach right side (D) to the back (A). Then attach support L (E) and support S (F) to the right side (C) as shown on the picture by using the Allen Bolt (H1) and tighten with the Allen Key (H4).
PAGE 2
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when it is not in use. Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE Please make sure that you have all parts indicated before you begin assembly of this item.
PAGE 3
PREPARATION Before beginning the assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any parts are missing or damaged, do not attempt to assemble the product. Tool required for assembly (included): Allen Key. 1 Step 1: attach the leg (B) to the top (A) by using washer (C2) and Allen Bolt (C1) as shown on the picture. Tighten all legs by using the Allen Key (C3).
PAGE 4
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when it is not in use. Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE Please make sure that you have all parts indicated before you begin assembly of this item. Weight capacity : 40 lbs.