Installation Guide

MODEL # PAT6730

Product Dimension: 60.63”Wx34.65”Dx15”H

NOTICE

Please make sure that you have all parts indicated

before you begin assembly of this item.

CARE AND MAINTENANCE

Store outdoor furniture indoors or cover well when it is not in use.

Dust regularly with small brush or vacuum.Spills should be taken care of

immediately before they harden or stain with a slightly dampened sponge.

PIECE DESCRIPTION PICTURE QUANTITY

Part List and Hardware List

Allen key

4 X

Allen bolt

1 X

4 X

Allen nut

1 X

Bolt extra

Seat

Front leg

Rear leg

Wrench

1 X

O U T D O O R

M6x50

M6x80

M6x90

Warning : Do not torque bolts / screws

Warning : Do not stand on the lounger

Weight capacity : 600 lbs.

PAGE 1
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when it is not in use. Dust regularly with small brush or vacuum.Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE OU T D O O R Please make sure that you have all parts indicated before you begin assembly of this item.
PAGE 2
Before beginning the assembly of the product,make sure all parts are present. Compare the parts with package contents list and hardware contents list. If any parts are missing or damaged,do not attempt to assemble the product. Tool required for assembly (included): Allen key and Wrench. 1 D2 D4 D2 D5 D2 Step1: attach the rear leg (A) to the seat (C) as shown on the picture by using the Allen bolt (D1) and Allen nut (D2).Tighten all with the Allen key (D4) and Wrench (D5).