Instructions / Assembly

Before beginning the assembly of the product,make sure all parts are present.
Compare the parts with package contents list and hardware contents list.
If any parts are missing or damaged,do not attempt to assemble the product.
Tool required for assembly (included): Allen key.
1
2
Step1: attach the right side (A) and the left side (B) to
the seat (D) as shown on the picture by using the Allen
bolt (E1) and tighten all with the Allen key (E4). Make
sure you don’t tighten the side too tight.This you will
do at the end.
Step 2: put the back (C) to the bench by using the Allen
screws (E2) to fit the top of the back (C) to the side parts (A)
and (B) as shown on the picture by using the Allen key (E4).
At last tighten all bolts and screws.
A
A
B
A
B