Assembly Instructions

Table Of Contents

MODEL # PAT6735

Product Dimension :35.43”Wx35.43”Dx29.13”H

Please make sure that you have all parts indicated

before you begin assembly of this item.

CARE AND MAINTENANCE

Store outdoor furniture indoors or cover well when it is not in use.

Dust regularly with small brush or vacuum. Spills should be taken care of

immediately before they harden or stain with a slightly dampened sponge.

PIECE DESCRIPTION PICTURE QUANTITY

Part List and Hardware List

Table top

Support bar

2 X

Allen key

2 X

Allen bolt

1 X

Leg

2 X

3 X

Allen screw L

Allen screw M

Allen screw S

2 XAllen bolt

2 X

Bolt extra

Base

M6x90

M6x60

M6x40

M6x30

M6x50

NOTICE

Warning : Do not torque bolts / screws

Warning : Do not stand on the table

Weight capacity : 40 lbs.

PAGE 1
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when it is not in use. Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE Please make sure that you have all parts indicated before you begin assembly of this item.
PAGE 2
Before beginning the assembly of the product,make sure all parts are present. Compare the parts with package contents list and hardware contents list. If any parts are missing or damaged,do not attempt to assemble the product. Tool required for assembly (included): Allen key. 1 Step 1: assemble the support bar (B) to the leg (C) as shown on picture by using the Allen screw M (E3) and tighten all with the Allen key (E7).
PAGE 3
4 3 D c 1 A A Step 3: put the leg to the table top (A) as shown on the picture by using the Allen bolt (E1) and tighten with the Allen key (E7). Step 4: use the Allen bolt (E5) and Allen screw S (E4) to fit the leg to the table top (A) as shown on the picture by using the Allen key (E7). Make sure the position while using the Allen bolt (E5) and Allen screw (E4) are the same as in the picture.