Assembly Instructions

Table Of Contents

MODEL# PAT6741

Product Dimension :26.38”Wx62.8”Dx42.52”H

NOTICE

Please make sure that you have all parts indicated

before you begin assembly of this item.

CARE AND MAINTENANCE

Store outdoor furniture indoors or cover well when it is not in use.

Dust regularly with small brush or vacuum.Spills should be taken care of

immediately before they harden or stain with a slightly dampened sponge.

PIECE DESCRIPTION PICTURE QUANTITY

Part List and Hardware List

Allen key

5 X

Allen bolt

1 X

Back

4 X

Allen nut

Allen screw

2 X

Bolt extra

Right side

Left side

Seat

Wrench

O U T D O O R

M6x90

M6x50

M6x55

M6x50

Warning : Do not torque bolts / screws

Warning : Do not stand on the bench

Weight capacity : 600 lbs.

PAGE 1
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when it is not in use. Dust regularly with small brush or vacuum.Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE Please make sure that you have all parts indicated before you begin assembly of this item.
PAGE 2
Before beginning the assembly of the product,make sure all parts are present. Compare the parts with package contents list and hardware contents list. If any parts are missing or damaged,do not attempt to assemble the product. Tool required for assembly (included) : Allen key and Wrench. 2 1 5 4 Step1: attach the right side (A) and the left side (B) to the seat (C) as shown on the picture by using the Allen bolt (E1) and tighten with the Allen key (E5). Make sure you don’t tighten the side too tight.
PAGE 3
E6 E5 5 Step 3: use the Allen nut (E2) to fit the bottom of the back (D) to the bench as shown on the picture by using the Allen key (E5) and Wrench (E6). Tighten all points before using.