Instructions / Assembly

MODEL PAT# 6745

Product Dimension: 82.68”W x 29.13”D x 28.74”H

Please make sure that you have all parts indicated before you

begin assembly of this item.

CARE AND MAINTENANCE

Store outdoor furniture indoors or cover well when it is not in use.

Dust regularly with small brush or vacuum. Spills should be taken

care of immediately before they harden or stain with a slightly

dampened sponge.

NOTICE

Warning : Do not torque bolts / screws

Warning : Do not stand on the bench

Weight capacity : 600 lbs

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY

Back

Seat

Side

Right Leg

Left Leg

Joint bar

Allen bolt L

Allen bolt S

Allen screw

Allen bolt S

Wrench

Allen Key

M6x35

M6x50

M6x45

M6x75

M6x30

Allen bolt M

M6x60

PAGE 1
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when it is not in use. Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE Please make sure that you have all parts indicated before you begin assembly of this item.
PAGE 2
PREPARATION Before beginning the assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any parts are missing or damaged, do not attempt to assemble the product. Tool required for assembly (included): Allen Key and Wrench. G3 C G5 B C C G3 D G4 D G4 D B G5 E G5 E C G3 G4 G4 G5 C B G5 E C Step 1: attach the side (C) to the seat (B) both side as shown on the picture.
PAGE 3
C A B G8 C G8 G1 G1 G2 G8 G2 G8 G7 G8 G6 G8 G7 G6 Step 3: attach the back (A) to the seat (B) as shown on the picture. Step 4: Lift up the side (C) as shown the picture and put down to lock the Then use the Allen bolt L (G1) and the Allen bolt S (G2) in the middle, side on the seat (B) then can use this lounger same as this bench. left and right use Allen bolt M ( G8) and tighten by the Allen Key (G7) and wrench (G6) as shown on the picture.