Instructions / Assembly

Before beginning the assembly of the product, make sure all parts are present.

Compare the parts with the package contents list and hardware contents list.

If any parts are missing or damaged, do not attempt to assemble the product.

Tool required for assembly (included): Allen Key and Wrench.

PREPARATION

Step 1: attach the side (C) to the seat (B) both side as shown on

the picture. Then use the Allen Bolt (H6) to tighten all sides

by using the Allen Key (H8). Make sure the Allen bolt S2 (H6)

come inside the hole of the side back (C) as shown on the picture.

Step 2: attach the Right Leg (D) and Left Leg (E) to the Joint bar (F) as

shown on the picture.Use the Allen Screw (H4) to attach it together and

tighten by the Allen Key (H8). Then put these legs to the seat (B), using

the Allen Bolt S1 (H5) and tighten all by using the Allen Key (H8) as

as shown on the picture.

H5 x 2