Instructions / Assembly

MODEL PAT# 6752

Product Dimension: 33.07”W x 19.69”D x 31.5”H

Please make sure that you have all parts indicated before you

begin assembly of this item.

CARE AND MAINTENANCE

Store outdoor furniture indoors or cover well when it is not in use.

Dust regularly with small brush or vacuum. Spills should be taken

care of immediately before they harden or stain with a slightly

dampened sponge.

NOTICE

Warning : Do not torque bolts / screws

Warning : Do not stand on the bench

Weight capacity : 600 lbs

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY

Front bar

Joint bar

Support bar

Back

Side

Seat

Wrench

Allen Key

16x

Allen bolt

M6x50

Allen screw

M6x60

Lock bar

PAGE 1
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when it is not in use. Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE Please make sure that you have all parts indicated before you begin assembly of this item.
PAGE 2
PREPARATION Before beginning the assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any parts are missing or damaged, do not attempt to assemble the product. Tool required for assembly (included): Allen Key and wrench.
PAGE 3
4 5 G1 G3 Z G1 G4 Pic 2 Y Pic 3 A G1 D A Y F1 F1 F1 x F2 F2 Pic 1 F2 Step 4: attached the support bar (D) to the back (A) as shown on the picture. Step5 : when folding seat of bench together (Pic 1) turn on the bolt (X) Then use the Allen bolt (G1) to tighten the support bar (D) to the back by using under seat for locking as shown on the picture . When lifting the back the Allen key (G3) and wrench (G4).