Instructions / Assembly

Step 4: attached the support bar (D) to the back (A) as shown on the picture.

Then use the Allen bolt (G1) to tighten the support bar (D) to the back by using

the Allen key (G3) and wrench (G4).

Step5 : when folding seat of bench together (Pic 1) turn on the bolt (X)

under seat for locking as shown on the picture . When lifting the back

(Pic 2 ), put the support into the bracket (Z) as shown the picture to

keep this part from dropping , lift up. After that, turn the small wooden

block(Y) to keep the back of bench from falling down.

Pic 1

Pic 2

Pic 3