Instructions / Assembly

Step 3: put the seat (C) to the bench as shown on the picture.
Then use the screw (G5) to tighten the seat (C) to the bench.
4
3
Step4 : repeat same step with other bench and connect 2 benches together as shown on the picture.
Then use the Allen nut L (G4) to tighten the back together as shown on the picture.Lock 2 benches by turn
on the bolt under seat to the hole as shown on the picture.
Remarks: Can change the corner bench from left to right just open the Allen nut (G4) , unlock the nut under seat and
replace by the Allen nut S(G1) . Move this bench to the other corner then assembly by the Allen nut L (G4) as shown on the picture.
Lock 2 benches by turn on the bolt under seat to the hole as shown on the picture.