Instructions / Assembly

Table Of Contents

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the ﬁnish during assembly

PIECE

DESCRIPTION

PICTURE

QUANTITY

LEGS

LOWER RING

ASSEMBLEY INSTRUCTION

FIREPIT

TOP RING

Product Dimensions: 32"L x 32" W x 25" H

Model#PIT1002A

12X

NUT

WASHER

12X

BOWL

NET

PAGE 1
ASSEMBLEY INSTRUCTION FIREPIT NOTICE * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the ﬁnish during assembly PIECE L DESCRIPTION LEGS PICTURE QUANTITY 4X LR LOWER RING 1X N NUT 12X W WASHER 12X TR TOP RING 1X B BOWL 1X N NET 1X Model#PIT1002A Product Dimensions: 32"L x 32" W x 25" H
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. 1 2 Step 1 : Satnd up the four legs (L) on a plane surface ,ﬁx the ring (LR) and screw them all four side 3 Step 3: Place the bowl (B) on the top of the top ring . Step 2: ﬁx the top ring (TR) on the top of the legs and screw them all four side .
PAGE 3
FIRE PIT CARE & SAFETY INSPECTING: This outdoor ﬁre pit should be inspected on a regular basis to ensure product safety and longer product life. Do NOT attempt to inspect this outdoor ﬁre pit until the ﬁre is COMPLETELY out. 1. Check handles to make sure they are secure. 2. Check components for any signs of damage or rust. 3. If damage to any component is -de tected, do NOT operate until repairs are executed.