Instructions / Assembly

Installation

Step 1

Install the mounting bracket(A) to the junction box with machine screw (B)

Step 2 Wire connection

Make wire connections, with wire connectors(F), following the reference chart listed below.

Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to:

Black White

*Parallel Cord(round&smooth) *Parallel Cord(square&ridged)

Clear,Brown,Gold or Black without Tracer(colored stripes

)

Clear,Brwn,Gold or Black without Tracer(colored stripes)

Insulated Wire(not green)with copper metal conductor Insulated Wire(not green)with Silver metal conductor

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on

mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground wire,

connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding

screw on mounting bracket. Tighten ground screw.

Step 3

Attach the backplate(C) to the junction box and fix it by turning the

washer(D) and Cap Nut (E) clockwise

Step 4

Insert the bulbs (J) into the socket (I).

PLEASE USE TYPE"A" BULB MAX 40-WATT OR CFL

BULB MAX 13-WATT OR LED BULB MAX 9-WATT

THERE IS 1PC ST58 4 WATT LED BULB IN THE BOX

Step 5

Put shade(K) on the Frame(L), fasten the glass fixture(M) to fix it.

Step 6

connect Frame(L) to the Top Hood(N)by using 2pcs Studs(O) and

washer(D) .

ENJOY YOUR LAMP