Instructions / Assembly

CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel
before beginning installation.
ITEM#:PND4001A
Care and Cleaning
To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean
water, never a solvent)to wipe the surface of the fixture.
To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean
cloth(use clean water, never a solvent) to wipe the interior surface of the fixture
Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth
to dust or wipe carefully.
Estimated Assembly Time:30 minutes
Part List and Hardware List
PIECE
DESCRIPTION PICTURE QUANTITY PIECE
DESCRIPTION
PICTURE QUANTITY
A mounting bracket 1X I ring nut 1X
B mounting screw 2X J bulb 4X
C threaded rod 1X K crystal
48X+ (1X
spare)
D wire connector 3X L screwed ball
48X + (1X
spare)
E collar loop 1X
M
collar loop
ring
1X
F canopy 1X N tube 1X
G chain 1X O lamp body 1X
H fixture loop 4X
Assembly Instruction
M
K
L
2X
3X
4X
48X
48X
水晶
铁件
B
安装螺丝
A
一字板
C
安装螺丝
D
接线帽
E
水晶吊环
F
吸顶座
G
吊链
H
吊环
戒指环
I
灯泡
J
M
直管
N
灯体
B
安装螺丝
A
一字板
C
安装螺丝
D
接线帽
E
水晶吊环
F
吸顶座
G
吊链
H
吊环
戒指环
I
灯泡
J
K
L
2X
3X
3X
12X
12X
水晶
铁件
M
4X
水晶珠串
N
4X
水晶珠串
O
水晶珠串
P
Q
直管
灯体
1/3