Instructions / Assembly

CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel

before beginning installation.

ITEM#:PND4014A

Care and Cleaning

To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean

water, never a solvent)to wipe the surface of the fixture.

To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit

breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean

cloth(use clean water, never a solvent) to wipe the interior surface of the fixture

Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth

to dust or wipe carefully.

Estimated Assembly Time:30 minutes

Part List and Hardware List

Assembly Instruction

Wire Nut

Mounting Plate

Mounting Screw

Bulb

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

28X

Canopy

Hanging Loop

Canopy Nut

Closable link/cap

Chain

Lamp Boby

Fixture Loop

Socket

Acrylic strand

1 / 3

PAGE 1
Assembly Instruction CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel before beginning installation. ITEM#:PND4014A Care and Cleaning To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water, never a solvent)to wipe the surface of the fixture. To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
PAGE 2
Installation Step 1 Unpack all parts from cartons carefully. K Attach the Acrylic Strands(C) onto the Iace of the Lamp Body(K) as diagram. C G Step 2 H Screw the Chain(J) to the Hanging Loop(F) and the Fixture Loop (I) with Closable link/cap (H) as diagram. H Step 3 Weave the 2 wire power cord and bare ground wire through every other loop to the top of chain(J),center holes of Hanging Loop(F)&Canopy(E)&Mounting Plate(B) as diagram.
PAGE 3
Step 4 Wire connection Connect,Hot,Black or Red outlet Supply Wire to: Black *Parallel Cord(round&smooth) Clear,Brown,Gold or Black without Tracer(colored stripes) Insulated Wire(not green)with copper metal conductor Connect,Neutral,White Outlet Supply Wire to: White *Parallel Cord(square&ridged) Clear,Brwn,Gold or Black without Tracer(colored stripes) Insulated Wire(not green)with Silver metal conductor *Note: When parallel wire(SPTI&SPTII)is used.