Instructions / Assembly

Installation

Step 1 Wire connection

Make wire connections, with wire connectors(C), following the reference chart listed below.

Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to:

Black White

*Parallel Cord(round&smooth) *Parallel Cord(square&ridged)

Clear,Brown,Gold or Black without Tracer(colored stripes) Clear,Brwn,Gold or Black without Tracer(colored stripes)

Insulated Wire(not green)with copper metal conductor Insulated Wire(not green)with Silver metal conductor

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on

mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground

wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding

screw on mounting bracket. Tighten ground screw.

Step 2

Install the Mounting Plate(A) to the junction box with

Mounting Screw (B)

Attach the Canopy(E) to the junction box and fix it by

turning the Canopy Screw(D) clockwise

Insert the bulbs (G) into the Socket(F)

PLEASE USE ON/OFF TYPE "A" BULB MAX 60-

WATT OR CFL BULB MAX 13-WATT OR LED BULB

MAX 9-WATT

THERE IS 1PC LED 9-WATT BULB IN THE BOX

Step 3

Consult a qualified electrician to ensure correct branch

circuit conductor.

ENJOY YOUR LAMP

2/2