Instructions / Assembly

Installation
Step 4
Consult a qualified electrician to ensure correct
branch circuit conductor
Step 1
1. Install the fabric shade (C) to the fixture body (B), secure with out
ring (D).
2. Place the bulb (E) to the socket.
ENJOY YOUR LAMP
Connect,Hot,Black or Red outlet Supply Wire to:
Connect,Neutral,White Outlet Supply Wire to:
Black
* Parallel Cord(round & smooth)
Clear,Brown,Gold or Black without Tracer(colored stripes
)
Insulated Wire(not green) with copper metal conductor
* Parallel Cord(square& ridged)
White
Clear,Brown,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green) with Silver metal conductor
*Note: When parallel wire(SPTI & SPT II) is used.The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left.)
Step 3
Installing the mounting bar(A) with mounting screw(A1),then
secure the backplate (F) with screw(A2)
Step 2 Wire Connetion
Note:PLEASE USE ON/OFF TYPE"B" BULB MAX 40-WATT
OR CFL BULB MAX 13-WATT
OR LED BULB MAX 9-WATT
THERE ARE 2PCS LED 4-WATT BULB IN THE BOX
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw on mounting brack
et, no less than 2" from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw on mounting bracket. Tighten ground screw.