Instructions / Assembly

Installation
Step 1
Step 2 Wire connection
Install the mounting bracket(C) to the junction box with machine screw (A)
2/2
Step 2 Wire connection
Make wire connections, with wire connectors(E), following the reference chart listed below.
*Parallel Cord(round&smooth) *Parallel Cord(square&ridged)
Clear,Brown,Gold or Black without Tracer(colored stripes)
Clear,Brwn,Gold or Black without Tracer(colored stripes)
Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to:
Black White
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Clear,Brown,Gold or Black without Tracer(colored stripes)
Clear,Brwn,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)with copper metal conductor Insulated Wire(not green)with Silver metal conductor
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on
mounting bracket, no less than 2" from wire end. Tighten ground screw. If fixture is supplied with a ground
wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding
screw on mounting bracket. Tighten ground screw.
Step 3
Step 4
screw on mounting bracket. Tighten ground screw.
Attach the backplate(F) to the junction box and fix it by turning
the screwed ball (G) clockwise
Put Glass shade(I) on socket(H) and fasten the socket ring(J) to
Step 5
Insert the bulbs (K) into the socket.
PLEASE USE TYPE"ST" BULB MAX 40-WATT OR
CFL BULB MAX 13-WATT OR LED BULB MAX 9-
Put Glass shade(I) on socket(H) and fasten the socket ring(J) to
fix it.
CFL BULB MAX 13-WATT OR LED BULB MAX 9-
WATT
THERE ARE 1PCS LED 4-WATT BULB IN THE BOX
Step 6
Consult a qualified electrician to ensure correct branch circuit
conductor.
ENJOY YOUR LAMP
2/2