Installation Guide

PIECE QUANTITY
A 1X
B 1X
H1 2X
H2 4x
H3
4x
H4 1X
Step 1 : Use allen key ( H4) to tight the bolt M8( H1) to press on plastic plug that is fixed into concret base . Tighten the bolt untill it touches the plastic plug without piercing
Model# : VNN1016A
Part List and Hardware List
CONCRETE BASE
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer . Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives. Cleaning
should be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly used
surfaces we recommend applying a quality paste wax which should be used on a regular basis to provide
additional protection from scratches and spills. How often you apply the wax depends on how much wear
the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
BOLT M8
Wahser
Square washer
Product Dimensions: L23.62xW23.62xH15.75 inches
DESCRIPTION
PICTURE
CONCRETE TOP
ALLEN KEY
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents
list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
H1
H2
H3

Summary of content (1 pages)