Installation Guide

PIECE QUANTITY

A 1X

B 2X

C 4X

H1 4x

H2 8X

H3 1X

H5 1X

Step 1 : Use 1 bolt M8x60 ( H3) to connect 2 wooden legs

Step 2 : the hardware need to connect 4 steel bar with wooden legs are 8 bolts and nut (H2)

Step 3 : Use 4 bolt M8x20 ( H5) and washer (H1)to fix concrete top and steel bar Step 4 : TURN AND FINSIH

CARE AND MAINTENANCE

Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and rubber

bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes,

harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water or

furniture polish. On highly used surfaces we recommend applying a quality paste wax which should be used on a

regular basis to provide additional protection from scratches and spills. How often you apply the wax depends on

how much wear the furniture receives.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* This item may require periodic tightening

Model# : VNN1026A

Part List and Hardware List

Product Dimensions: D29.53xH14.57 inches

DESCRIPTION

PICTURE

CEMENT TOP

Wooden legs

Steel bar

WASHER

angle bolt and cylinder nut

BOLT M8x60

BOLT M8x20

ALLEN KEY

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.

If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 10 minutes.