Installation Guide

THE DESIGN OF THE CHAIR IN THE DRAWINGS
MAY VARY FROM YOUR ACTUAL CHAIR, BUT
ASSEMBLY IS THE SAME ON ALL MODELS.
Before beginning assembly of product, make sure all parts are presents. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attampt to assemble the product.
Estimated Assembly Time : 5 minutes.
Tools Required for Assembly (Included): Allen Key
PREPARATION
See care label
CARE AND MAINTENANCE
* Please make sure that you have all parts indicated before you
begin assembly of this item
* This item should be assembled on a soft surface to prevent
scratching the finish during assembly
* This item may require periodic tightening
NOTICE
Part List and Hardware List
NO.
1
2
Legs
Seat
DESCRIPTION
H1
H2
Allen Bolt
Allen Key
PICTURE
QTY
1
1
4
1
Weight Capacity : 300 lbs
WARNING : DO NOT STAND ON CHAIR
WARNING : DO NOT OVER TORQUE BOLTS/SCREWS
Hardware is located inside the box. You can find them placed
near the sign 'HARDWARE INCLUDED’
1
H1
H2
1
2
Hardware is located inside the box. You can find them placed
near the sign 'HARDWARE INCLUDED’
Step 1 : Put the seat on top of its base. Follow the arrow head
and signs to place it correctly. Align its holes so bolts can be
placed properly.
Step 2 : Insert bolts in each hole. Tighten them using allen key
(provided). Do not over torgue bolts.
Step 3 : Your chair is ready. Seat back and relax.