Product Manual

MODEL

NUMBER

7756

7756-37: 1 of 2; Rev. 1; 06/07

Mail Station Base

ASSEMBLY INSTRUCTIONS

Safco Products Company, New Hope, MN 55428

Back Panel 1 7756-01

Left Panel 1 7756-02

Right Panel 1 7756-03

Top Panel 1 7756-04

Front Rail 1 7756-05

Back Leg 2 7756-06

Front Leg (Bent) 2 7756-07

Glide Adaptor 4 7749-26

Adjustable Glide 4 7749-25

Machine Screw 12 7749-28

Hex Nut 8 7749-29

LETTER

CODE

DESCRIPTION

QTY.

PART NO.

PARTS LIST

Sort and count your parts!

IMPORTANT

 READ and FOLLOW these instructions carefully!

 CHECK ALL PACKAGING - there may be parts in it!

 SORT and COUNT your parts - compare with the list below. If you find problems,

refer to the Product Warranty Registration form included with this product.

TOOLS REQUIRED:

#2 Phillips Screwdriver, Adjustable Wrench

ASSEMBLED UNIT

For questions or concerns, please call

Safco Consumer Hot Line 1-800-664-0042

available Monday-Friday 8:00 AM to 4:30 PM (Central Time)

(English-speaking operators)

Z41790A0

PAGE 1
Mail Station Base MODEL NUMBER 7756 ASSEMBLY INSTRUCTIONS and FOLLOW these instructions carefully! IMPORTANT READ CHECK ALL PACKAGING - there may be parts in it! SORT and COUNT your parts - compare with the list below. If you find problems, refer to the Product Warranty Registration form included with this product.
PAGE 2
B Left and Q C Right Panels Q 1 Locate as illustrated. Work with one side at a time to align the holes on the A Back Panel with the holes on the Q back end of each end Panel. From the back side, insert two J Machine Screws into the holes, Q fastening with one Q K Hex Nut per screw. J Q BACK PANEL K Q LEFT PANEL RIGHT PANEL 2 Attach Q E Front Rail by aligning the two holes on each side of the front rail with two holes on the upper, front of each end panel.