SDS

SAFETY DATA SHEET
according to the (US) Hazard Communication Standard (29 CFR 1910.1200)
Product number
110620
Version 1. 0
Product name
LMX broth modified acc. to MANAFI and OSSMER for microbiology Fluorocult®
Page 3 of 9
SECTION 6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area,
observe emergency procedures, consult an expert.
Advice for emergency responders:
Protective equipment see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see
sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation
of dusts.
SECTION 7. Handling and storage
Precautions for safe handling
Observe label precautions.
Conditions for safe storage, including any incompatibilities
Protected from light. Tightly closed. Dry.
Store at +15°C to +25°C (+59°F to +77°F).
SECTION 8. Exposure controls/personal protection
Exposure limit(s)
Contains no substances with occupational exposure limit values.
Engineering measures
Technical measures and appropriate working operations should be given priority over the use of personal
protective equipment.
Individual protection measures
Protective clothing should be selected specifically for the workplace, depending on concentration and quantity of
the hazardous substances handled. The chemical resistance of the protective equipment should be inquired at
the respective supplier.
Hygiene measures
Change contaminated clothing. Wash hands after working with substance.
Eye/face protection
Safety glasses
Hand protection
Chemical-resistant, impervious gloves complying with an approved standard should be worn at
all times when handling chemical products if a risk assessment indicates this is necessary.
Respiratory protection
required when dusts are generated.