Use and Care Manual

DRINKING WATER
TEST KIT
LEAD (Pb)
Prepare for Testing:
Remove all three sample vials from
the test kit box. Remove the instructions
panel card (Panels B and C) at the
perforated line. Follow instructions
located on alternate sides of that card.
Complete Step #2 for Certified Lab
Testing. You may complete Step #3
for DIY Testing of Bacteria at any time.
1
2
3
(Panel A)
DO NOT DAMAGE OR REMOVE THIS PANEL FROM THE BOX. IT MUST BE FILLED OUT AND RETURNED WITH YOUR WATER SAMPLE.
EnviroTestKits® will not share
your contact information or
your drinking water test results
with any third parties.
STEP #1
REQUIRED REGISTRATION
PLEASE PROVIDE THE REQUIRED INFORMATION BELOW AND REGISTER
YOUR KIT ONLINE AS INSTRUCTED IN ORDER TO RECEIVE YOUR TEST RESULTS.
Water Sample Registration: *REQUIRED INFORMATION
Please go to our website www.safehometestkits.com/registerkit and register your
water sample (it will take about one minute). Once your water sample is registered,
you will receive a prompt on your screen with an order number. Place this number
in the “ORDER NUMBER” box below. In order to receive your test results, you must
register your kit online and fill out the *REQUIRED INFORMATION on this card
completely and legibly.
*ORDER NUMBER:
*FIRST AND LAST NAME:
*CITY: *STATE: *ZIP:
*EMAIL:
*PHONE:
*SAMPLE COLLECTION DATE: *TIME:
Receive Test Results:
The information that you provide to
us (online and on this card) will allow
our technologies to track your water
sample (for Laboratory Certified Testing)
from start to finish. You must provide
all *REQUIRED INFORMATION and register
your kit online in order for us to issue
your test results.
(Do-It-Yourself) Bacteria In Water Test
results will be revealed to you in the
comfort of your own home (please see
Panel C for complete instructions).
Testing your drinking water with
Safe Home
®
is as easy as 1-2-3!