Installation Guide

INSTALLATION AND OPERATING INSTRUCTIONS

CORDLESS, NO TILT WAND, FAUX WOOD 2” BLIND

Step 1. Check Package Contents Part List

A) Mounting Brackets: 2 - Up To 33” Wide;

3 - Up to 48” Wide; 4 - Up To 72” Wide

B) 1 1/4" Screws: Four Per Mounting Bracket

Step 2. Tools Required

Step 3. Bracket Location and Installation

IMPORTANT: DO NOT MOUNT BRACKETS DIRECTLY ABOVE SPRING

MECHANISMS IN HEAD RAIL

Step 4. Secure the Head Rail

PAGE 1
INSTALLATION AND OPERATING INSTRUCTIONS CORDLESS, NO TILT WAND, FAUX WOOD 2” BLIND Step 1. Check Package Contents Part List A) Mounting Brackets: 2 - Up To 33” Wide; 3 - Up to 48” Wide; 4 - Up To 72” Wide B) 1 1/4" Screws: Four Per Mounting Bracket Step 2. Tools Required Step 3. Bracket Location and Installation IMPORTANT: DO NOT MOUNT BRACKETS DIRECTLY ABOVE SPRING MECHANISMS IN HEAD RAIL Step 4.
PAGE 2
Blind can be inside or outside mounted. For Inside mount, minimum for flush mount is 3 inch depth. Minimum mounting depth is 2 inches. REMEMBER: Do not align the brackets directly over the cord spring mechanism. It can cause the blind to not operate properly. Step 5. Operate Cordless Faux Wood Blind To lower the shade: Grip bottom rail evenly and pull down to the desired length. To raise the shade: Grip bottom rail evenly and lift towards head rail to desired height.