User manual

User Manual of DS-6100-ATA Digital Video Server
- 18 -
3.2 Video Server HDD format
Please refer to chapter 3.1 to get video server IP address. Then use remote client software to
access video server. Please refer to client software user manual for detail information.
3.3 Video Server Recording Setup
Please use remote client software to remote setup video server local recording parameters.
3.4 PTZ control
Step1: Connect DS-6100-ATA RS-485 interface with PTZ. Please refer to RS-485 pin
definition. DVS just uses Pin8 (TX+) and Pin7 (TX-) to send PTZ control command.
Step2: You can use remote client software to setup PTZ protocol.
In client software remote “Local Configure” dialog box, select “COM configuration” tab button.
You can select DVS PTZ parameters in the corresponding dialog box.
Fig. 3.11 RS-485
Please refer to client software user manual for detail information.