Installation manual

4
Table of Contents
1. Safe Fire Detection Company Introduction 5
2. SafeFlame IR3 Introduction 6
2.1 Overview 6
2.2 Principles of Operation 7
2.3 Detector Performance Options 7
3.3 Mounting Bracket 12
2.3.1 Cone of Vision 7
3.3.1 Specifications 12
3.5 Setting up the Detector 17
3.5.1 Sensitivity 17
7 2.2.1 IR3 Flame Detection
6 2.1.1 Model and Types
7 2.2.2 RS-485 Modbus
2.3.2 Detector Sensitivity 8
2.3.3 LED Indicators 8
2.3.4 False Alarm Protection and Immunity 9
3. Installation 11
3.1 Guidelines for Installation 11
3.2 Unpacking the Detector and Necessary Tools 11
3.3.2 Installation 12
3.4 Wiring and Conduit Connections 12
3.4.1 Terminal Connections 12
3.4.2 Conduit 16
3.5.2 Signal Latching 17
3.5.5 Relay Output 18
3.5.6 RS-485 19
4.3 Testing 21
4.3.1 Built-in-Test 21
4. Operating and Testing the Detector 20
4.1 Initial Power Up 20
4.2 Safety Precautions 20
4.3.2 Test Lamp 21
5. Maintenance and Troubleshooting 22
5.1
Maintenance
22
5.2 Troubleshooting 22
This guide is to be used as a general guideline for installing a SafeFlame
flame detection system. Please b e sure to check all local and state codes
prior to designing and installing a system. It is advisable to contact the
local AHJ in the planning stages of a project.
2.4 Specifications 9
2.4.1 Electrical Specifications 9
2.4.3 Mechanical Specifications 10
2.4.2 Environmental Specifications 9
3.5.3 Alarm Delay 18
3.5.4 Built-in-Test (BIT) 18
SafeFlame Installation and Operation Manual
(Publication#: MA-SF200OM)