User manual

Problem Remedy

Cooker cannot be switched on Check whether the child proof lock is active. The lock stops the

use of the cooker. For instructions, see chapter 3.2.

The appliance repeatedly gives

false alarms about hazardous

cooker situations (the warning

light for cooktop hazard ❺ is on).

Test the working order according to Installation manual. If the

appliance is in working order, but the false alarms recur, you

may adjust the alarm limit of the appliance. See Installation

manual.

The appliance repeatedly gives

false alarms about hazardous

cooker situations, especially

when the oven is in use.

There may have been a mistake in the set up of the appliance.

See Installation manual.

The indicator light for normal ac-

tivity ❹ does not blink every ve

seconds.

There may be a problem with the power supply. Ensure that the

power supply Ⓓ is connected correctly to the wall socket and

that the socket has power. If the problem is not solved, remove

both the extractor hood and the safety appliances from the

electrical network and contact SAFERA product support.

The appliance repeatedly gives

out water leakage alarms.

For instructions, see chapter 3.4. If the alarms recur, take off

the fuses for the cooker and the oven. Check that the leakage

sensors are correctly connected. Put back the fuses.

The installation or the set up

does not succeed.

cian to check the connections. If the connections are made cor-