User manual

14
panel of the host.
“ Disarm ” Key: Press “ Disarm ” key to disarm the host (except for shielded zone,
doorbell zone and emergency zone). The function of “ Disarm ” key is the same as
that of F3 shortcut key on the keyboard panel of the host.
Emergency Key: Press Emergency Key to activate emergency alarm whether the
host is in Arm mode or Disarm mode. The function of Emergency Key is the same
as that of F4 shortcut key on the keyboard panel of the host.
“ Partial Arm ” Key: Press “ Partial Arm ” key to enter into “ Partial Arm ” mode.
The function of “ Partial Arm ” key is the same as that of F 1 shortcut key on the
keyboard panel of the host.
【
Note
】
a. Remote controllers shall be added in accordance with the same
procedure.
b. To let the host learn codes of remote controllers continuously, enter 11
and # after 11 when the host completes learning the code of the first remote
controller, and then press “ Arm ” key to let the host learn the code of the next remote
controller until the host completes learning codes of all remote controllers.
2.
2.
2.
2. Delete
Delete
Delete
Delete Remote
Remote
Remote
Remote Controllers
Controllers
Controllers
Controllers (Take
(Take
(Take
(Take Remote
Remote
Remote
Remote Controller
Controller
Controller
Controller 10
10
10
10 for
for
for
for example
example
example
example )
)
)
)
The first five steps of deleting a remote controller are the same as those of adding a
remote controller.
Step 6: Press “ # ” key again, and the host gives out a voice prompt “ Ding ” ,
which means a remote controller is successfully deleted.
【 Note 】 a. Remote controllers which have been added can be deleted in accordance
with the same procedure.
b. To let the host delete codes of remote controllers continuously, enter 11 and
# after 11 when the host deletes the code of the first remote controller, and then press
“ # ” key to let the host delete the code of the next remote controller until the host
deletes codes of all remote controllers.
c . To delete all remote controllers in a shortcut way, please follow the
following steps: