User manual

20
② Command Function: On-site Alarm Mode
Command Grammar: 3 #
Function Description: This command enables the host to work under on-site
alarm mode in which the host can not dial any telephone and check outside line, as
well as to cancel all alarm information.
Operating Steps: “ ### ” （ Please enter the preset password ） + “ 112233# ” （ The
host enters into adjusting mode
）
+ “ 3# ”
（
The host is fully armed,
and on-site alarm mode is activated ） .
2) Local Disarm Mode
Command Function: Local Alarm
Command Grammar: 2 #
Function Description: This command serves to disarm the host and exit SET
mode.
Operating Steps: “ ### ” （ Please enter the preset password ） + “ 112233# ” （ The host
enters into adjusting mode ） + “ 2# ” （ Disarm the host ） .
3) Clear Failure Information
Command Function: Clear Failure Information
Command Grammar: 4 #
Function Description: This command serves to clear failure information,
which is mainly applicable to manually clear troubleshooting information.
Operating Steps: “ ### ” （ Please enter the preset password ） + “ 112233# ” （ The
host enters into adjusting mode
）
+ “ 4# ”
（
Clear abnormal indication
）
.
4) Command Function: Modify Preset Password
Command Grammar: 8 # A A A A A A # B B B B B B # B B B B B B # . “ A A A
A A A ” is a preset old 6-digit password, and “ BBBBBB ” is a new 6-digit password.
Once the preset old password is modified, the preset old password will be
automatically invalid. To enter into SET mode again, users must enter the new
password.
Operating Steps: “ ### ” （ Please enter the preset password ） + “ 112233# ” （ The host
enters into adjusting mode ） + “ 8# ” （ Please enter the preset password ） + “ 112233# ”
（ Please enter a new password ） + “ BBBBBB# ” （ Please enter the new password