User manual

21
again ） + “ BBBBBB# ” .
If you have forgotten the preset password indiscreetly , you shall contact our
customer service centre or your local distributor for help.
5) Command Function: Modify User Password
Command Grammar: 9 # A A A A A A # B B B B B B # B B B B B B # . “ A A A
A A A ” is an old 6-digit user password, and “ B B B B B B ” is a new 6-digit user
password. Once user password is modified, the old user password will be
automatically invalid. To enter into set-up mode again, users must enter the new
password.
Operating Steps: “ ### ” （ Please enter the preset password ） + “ 112233# ” （ The
host enters into adjusting mode ） + “ 8# ” （ Please enter user password ） + “ 123456# ”
（
Please enter a new password
）
+ “ BBBBBB# ”
（
Please enter the new password
again ） + “ BBBBBB# ” .
If you have forgotten user password indiscreetly , you shall contact our
customer service centre or your local distributor for help.
4. How to Set Phone
① Command
Command
Command
Command Function:
Function:
Function:
Function: Set
Set
Set
Set Informed
Informed
Informed
Informed Phone
Phone
Phone
Phone Numbers
Numbers
Numbers
Numbers
Operation Code: 2 groups of user phone numbers (fixed phone or cell phone)
represented by 10, 11 respectively can be set.
2 groups of phone numbers of the alarm receiving centre (fixed phone)
represented by 17, 18 respectively can be set (charge for access to 110
network).
Function Description: Set/delete informed phone numbers to ensure alarm information
can be transmitted by dialling the preset fixed phone numbers when the
host gives out an alarm.
【
Note
】
If the informed phone numbers are local fixed phone numbers, a local area
code is not required for dialling informed phone numbers.
1. Set Informed Phone Numbers
Fox example: Set the first group of informed user phone number
For the first two steps, please refer to the above mentioned procedure in SET mode.