User manual

25
② Command
Command
Command
Command Function:
Function:
Function:
Function: Audition
Audition
Audition
Audition the
the
the
the Record
Record
Record
Record
Command Grammar: 3 1 #
Function Description: Press 3 1 # , and then 2-3 seconds of record will be played
from the built-in speaker of the host.
7. Select Playing Content
① Command Function: Select playing the record
Command Grammar: 3 2 #
Function Description: After receiving an alarm call, you will hear the voice
message prerecorded in the host, and then you can follow the prompts to perform
other operations.
② Command Function: Select playing the siren
Command Grammar: 3 3 #
Function Description: After receiving an alarm call, you will hear the siren, and
then you can follow the prompts to perform other operations.
Note: When any function of ① and ② is selected, the other function will be
automatically invalid.
8. Set Various Time Parameters
① Command Function: Set siren duration
Command Grammar: 3 4 # D D #
Function Description: “ D D ” refers to siren duration (01-99 minutes) and must
be a 2-digit number. After the alarm host sounds an alarm, the system will
automatically turn off siren and disable siren output once siren duration reaches a
preset value, but the indicator in the defense zone where an alarm occurs is on
continuously until the defense zone is disarmed.
Operating Steps: “ ### ” （ Please enter the preset password ） + “ 112233# ” （ The
host enters into adjusting mode
）
+ “ 34# ”
（
Please enter siren duration
）
+ “ 10# ”
（
The
host gives out a voice prompt “ Ding ” to indicate siren duration has been
successfully set up ） .