User manual

5
security threats and 2 groups of telephone numbers of the alarm receiving
centre. The telephone numbers of the alarm receiving centre must be fixed
telephone numbers, which can be dialled preferably when an alarm is triggered
under telephone alarm mode.
� Alarm or failure information can be displayed on the digital display.
� The dialling times can be set.
�
External 12V backup battery input.
� Call Pickup: Whether or not telephones connected with the alarm are busy, the
alarm host will take up the line and send alarm information to users in an
accurate and timely way.
� C ompatible with dual- tone multi - frequency signaling , it can dial 14-digit
telephone numbers.
� It can get access to any pre-set telephone number and can set monitoring,
arming, disarming and on-the-spot-alarm by entering user password.
� The alarm information of any detector can be memorized, and the alarm
information stored in the host can be erased once the relevant defense zone is
rearmed or the host is reset.
� It can prerecord a 3-second voice message, so automatic voice responds to the
alarm when an alarm occurs.
� Entry time, leaving time and alarm sound duration can be set.
� There is sound prompt or LED indication when telephone line is cut-off, alarm
host or detector is under low power, the system is subject to strong light
interference.
� DC 12V/0.5A alarm output is provided to connect the siren or control other
devices.
� All settings can be stored in a memory unit, so they can not be lost when power
failure occurs.