User manual

7
host gets ready for receiving alarm signals from partially armed zones within the
system and giving out alarm.
6)
RECORD
Indicator: In set-up mode, users can prerecord
a
voice message to play
back at the time when
a
call is answered to respond to an alarm. When
a
voice
message is recorded,
RECORD
Indicator will light up.
7)
SHIELD
Indicator: When the host receives shielded signals, SHIELD
Indicator
will light up, which means the host can not receive any alarm signal in
a
short time
except alarm signals from emergency zones.
8)
ALARM
Indicator: When any detector connected to the host sends an alarm
signal, ALARM
Indicator will light up, and display defense zone No. where an
alarm is triggered.
9) Low
Voltage
Indicator: When the voltage of the built-in battery of any detector
connected to the host is too low, Low
Voltage
Indicator will light up and display
the defense zone No.
10) Battery Damage
Indicator: When the built-in battery of any detector connected
to the host is damaged, Battery Damage
Indicator will light up and display the
defense zone No.
11)
Invalid
Indicator: When any infrared detector (active wireless infrared detector)
connected to the host can not work properly due to non-calibration or damage,
Invalid
Indicator will light up.
When any detector (magnetic door detector) can not work properly due to failure to
close for
a
long time or damage, Invalid
Indicator will light up.
1 2 ) Light Disturbance
Indicator: When any detector connected to the host can not
work properly due to strong light disturbance,
Light Disturbance
Indicator will
light up.
13)
Telephone Alarm
Indicator: When Telephone Alarm
Indicator lights up, that
means the host is armed under telephone alarm mode. When an alarm occurs, the
host will
dial
alarm informed telephones.
14) Telephone Line Cut-off
Indicator: When
Telephone Line Cut-off
Indicator
lights up, that means the external telephone
line
is not well connected or cut off, and
the system will give out voice prompt The telephone
line
is cut off
once per