Instruction Manual

Lower Anchor
Hooks
Adjuster
20
LATCH: Lower Anchor Use
19
For Use in Rear-Facing
or Forward-Facing
Mode
Lower Anchor
Belt Storage Attachment
Lower Anchor
Belt Storage
Attachments
Lower Anchor
Belt Parts
To Remove Lower Anchor Belt from Storage
Attachment on Car Seat
Squeeze spring lever on hooks and remove hooks from storage
attachments.
To Remove Lower Anchor Belt from
Vehicle Anchor Bars
Remove the tension from the belt by pushing
down on the side of the car seat with the
adjuster. Then press the adjuster’s button to
loosen the belt.
Remove the hook from the anchor by squeez-
ing the spring lever on the hook, pushing the
hook back into the seat bight, and rotating
the hook to the side. Then pull the hook out of
the vehicle seat bight.
To Store Lower Anchor Belt
When using the vehicle belts to install, or
when the car seat is not installed in a
vehicle, the lower anchor belt must be
properly stored.
Thread lower anchor belt through Forward-
Facing Belt Path then attach hooks to
attachments behind pad as shown. Gently
tighten to remove slack.
Your vehicle’s features may be considerably different
than those pictured here.
The lower anchors of LATCH (Lower Anchors and Tethers for
CHildren) is a universal system for installing car seats without using
vehicle seat belts.
The LATCH: lower anchor belt can only be used in vehicles that have
the lower anchor bars installed in designated seating positions. Most
vehicles manufactured after September 2002 are equipped with
LATCH: lower anchor bars.
Check your vehicle owner’s manual to see which seating positions
may be equipped with LATCH: lower anchor bars.
Do not use both the lower anchor belt and vehicle belt
at the same time. When used correctly the lower anchor
belt or the vehicle belts are equally safe.
Vehicle
Seat Bight
LATCH: Lower Anchor Bars