Instruction Manual

Rear-Facing LATCH:
Lower Anchor Install
33
continued on next page
34
From Bottom of Car Seat,
Release Pad’s Elastic
Straps From Tabs
Before you begin installing the seat
into your vehicle, did you check:
Your child’s weight and height?
See page 27.
Your child’s fi t? See page 8.
Do you need to make adjustments to the
harness height or the buckle position?
Remove Lower Anchor Belt from
Storage Attachments
Or if the lower anchor belt was used
Forward-Facing, remove it from the
Forward-Facing Belt Path so both
hooks are on the same side of the car
seat as shown.
1
2
Locate Rear-Facing Belt Path
Thread the lower anchor hook through
the Rear-Facing Belt Path opening as
shown.
The lower anchor belt adjuster can be
on either side of the car seat.
Route Lower Anchor Belt
The belt goes:
• across the car seat; AND
• under the car seat pad; AND
• in front of the buckle; AND
• out the other Rear-Facing Belt
Path opening.
Do not twist belt.
1
2
4
5
6
Pull Down Recline Stand to
Unlock and Fold It Under
Car Seat
Loosely attach the tether hook to its
storage attachment before folding the
recline stand.
Fold the recline stand and then gently
tighten the tether strap to remove
slack.
Adjuster
Finished Lower Anchor
Belt Routing
Pull Seat Pad Off Front of Shell
3