Instruction Manual

Installing Harness System
55 56
continued on next page
1
2
3
1
2
3
1
2
3
Insert Buckle’s Metal
Retainer into Slot
Closest to Child
The buckle must face out.
Rear-Facing Mode:
You must use the 1st or
2nd buckle slots.
Forward-Facing Mode:
Any slot can be used.
Thread Harness Strap
With the sewn end of harness
strap loop facing the buckle,
thread the harness strap down
through the hip harness slot.
Pull Harness Strap
Across Bottom of Shell
Push the harness strap up through
the other hip harness slot.
Do not twist the harness strap.
Make Harness Strap Even
The sewn ends of the harness strap
loops must face each other when
you hold them up.
Pull Metal Retainer
Completely Through
Pad and Shell
Check Buckle
Pull up on the buckle to make sure it
is secured.
The buckle must not pull out.
Installing Buckle
Installing Harness Strap