Instruction Manual

Body Pillow (on select models)
To remove, slide it out from behind
the harness straps.
Harness Covers (on select models)
The harness covers help provide
comfort to your child’s neck.
If the harness covers will not allow proper
positioning of the chest clip or interfere
with getting a tight enough harness fi t for a
smaller infant, remove and do not use.
Store until your child is large enough to use the harness covers while
maintaining a properly fi tting harness.
To remove:
1. Pull Fastening Strips Apart
2. Pull Harness Covers Off Harness Strap
Accessory Use
3 4
Cup Holders (on select models)
Depending on your model,you may have
one cup holder.
The cup holders are top-rack dish-
washer safe.
To attach, push the cup holder onto the
end of the armrest until you hear a click.
For Use in Rear-Facing
or Forward-Facing Mode
Head Pillow (on select models)
To remove, from the back of the head
pillow gently pull the fabric tabs out from
the shoulder harness slots.
To attach, slide the fabric tabs into the
shoulder harness slots.
For Use in Rear-Facing
or Forward-Facing Mode
For Use in Rear-Facing
Mode Only