Instruction Manual

1211
Attach 1st Harness Strap
Loops to Splitter Plate As
Shown
The sewn ends of the harness
strap loops must face towards
you.
Do not twist the harness strap or
the harness adjustment strap.
Make sure the same harness
strap loops are fitted completely
on both sides of the splitter plate.
The harness strap loop ends
must go through the recline stand
as shown.
The harness adjustment strap
must lie under the harness strap
as shown.
From Back of Car Seat,
Pull Harness Straps
Through Pad and Shell
Do not twist the harness strap.
sewn
end
5
6
The harness system must be installed correctly. Do not
use a child restraint with damaged harness straps.
Recline Stand
Harness Adjustment
Strap
Check your child’s fit often.
If you cannot achieve a snug harness fit for your child,
see pages 15-17.
To learn how to check harness tightness, see pages 48-50.
Check the harness straps often for any wear or damage.
Rethread Harness Strap
Into Correct Shoulder
Harness Slots For Your
Child
4
For Rear-Facing child fi t, see page 8.
For Forward-Facing child fi t, see page 9.