Instructions / Assembly

OK
NO
Repeat steps
2b
–
2c
with 1 MEDIUM extension
on the other side of the
gate. Insert extension
caps ONLY IF you are not
adding another extension
to this side.
Repeat step
2c
with
final MEDIUM extension
on either side of the gate.
Insert extension caps in all
4 corners.
Lay out all parts
Tools not included:
Measuring tape
Install in doorway
TIP: Think about which side you’ll want the handle on during
daily use when you position the gate.
Position gate flush to floor. Hand tighten top and
bottom pressure bumpers until SecureTech
TM
indicator
turns green.
IF you are using the SMALL extension, always add it to the gate
FIRST. Insert extension into gate. Insert extension caps ONLY IF
you are not adding another extension to this side.
TIP: Use the bolt side of the
bumper to gently extract the
extension caps from the gate.
• Remove all contents from packaging and
discard box, and/or poly bags.
• Lay out all parts.
• Do not return this product to the place of
purchase. If any parts are missing, email
[e-mail], call Consumer
Relations at [phone], or fax at
[phone]. You can also visit our
website at www.safety1st.com. Have ready
the model number (GA107) and date code
(manufacture date) located on inside of
gate panel.
1
2
Use 1 SMALL
and
2 MEDIUM
extensions,
Go to steps
2a
–
2e
Use 2 MEDIUM
extensions,
Go to steps
2b
–
2d
Use 1 SMALL
and
1 MEDIUM
extension,
Go to steps
2a
–
2d
Use 1 SMALL
extension,
Go to steps
2a
–
2c
Use 1 MEDIUM
extension,
Go to steps
2b
–
2c
WARNING:
• To prevent serious injury or death, securely install gate or
enclosure and use according to manufacturer’s instructions.
• NEVER use with a child able to climb over or dislodge the gate or
enclosure.
• NEVER leave child unattended.
• Use only with the locking/latching mechanism securely engaged.
• Intended for use with children from 6 months through 24 months.
• This product will not necessarily prevent all accidents.
• To prevent falls, NEVER use at top of stairs.
• ALWAYS install as close to the floor as possible.
• Gate is not meant to replace proper adult supervision.
CAUTION:
• ALWAYS check regularly to ensure gate and locking systems
are secure. Tighten locking hardware as necessary. DO NOT
over-tighten.
• DO NOT use gate if any parts are missing or broken. Contact Dorel
Juvenile Group for replacement parts and instructional literature if
needed.
• DO NOT substitute parts.
• DO NOT use at top of stairs.
• For bottom of the stairs use, place gate on the lowest stair from
bottom.
• DO NOT immerse in water. To clean, wipe with a damp cloth and dry.
4
USA
USA
USA
1
Up to 47”Up to 44”Up to 41”
If Opening is...If Opening is...If Opening is...
Easy Install
Extra Tall
and Wide
Walk-Thru Gate
min 29” - max 47”
BOTTOM
TOP
Measure opening
Up to 35” Up to 38”
If Opening is... If Opening is...
Assemble
SMALL
extension
Add extension
For openings
over 38” - 44”
only
For openings
over 44” - 47”
only
Remove
extension
caps
USA
USA
TOP
BOTTOM
USA
USA
USA
BOTTOM
TOP
A
BB
B
B
caps:
check!
Insert pressure
bumpers into 4
corners
x4
Remove extension caps from
gate. Keep them near by;
you will need them for final
assembly.
To Use
Remove ‘STOP’ sign, raise swing stops
and open gate
Optional: Using the swing stops
Check and re-check the indicator
Gate is fully pressurized when SecureTech
TM
indicator
turns green. Be sure to re-check the indicator regularly
and re-tighten the bolts if you see any red when gate
is closed.
USA
USA
Red Green
Gate will swing both ways unless
one of the swing stops is down.
Gate will not swing at all if both
swing stops are down.
If Opening is up to 32” go to step
3
. No extensions are required.
Age: 6 to 24 months.
Adult assembly
required.
GA107
2
2b 2c
2d
2e
2a
3
5
4
6
MEDIUMSMALL
U
S
MEDIUM
SMALL
A
B
B
BB
A
A
B
Extension caps
©2015 Dorel Juvenile. [phone] www.safety1st.com Made in CHINA. Hecho en CHINA.
Styles and colors may vary. Los estilos y los colores pueden variar.
Distributed by (distribuido por) Dorel Juvenile Group, Inc., 2525 State St., Columbus, IN 47201-7494
Dorel Juvenile Canada, 2855 Argentia Road, Unit 4, Mississauga, ON, L5N 8G6 11/12/15
4358-6675A
Importado y Distribuido en Chile por: Comercial e Industrial Silfa S.A. - San Ignacio 0201 / Parque Industrial Portezuelo Quilicura, Santiago Chile.
Fono (562) 2339 9000. En Perú por: Comexa S.A. - Los Libertadores 455 – San Isidro, Lima – Perú. Fono (511) 4469014. En Centro América,
Caribe y Ecuador por: Best Brands Group S.A. – Av. Balboa, Bay Mall Plaza, Planta Baja, local 9, Panamá. - Fono: [phone].
En Colombia por: Baby Universe S.A.S. - Vía 40 No. 77-29, Barranquilla, Colombia - Fono: [phone]
Importador: DJGM, S.A. DE C.V. Gabriel Mancera No. 1041 Col. Del Valle Delegación Benito Juárez C.P. 03100 México, D.F. R.F.C.
DJG140305GN9 Tel. [phone]