User's Manual

Installation and Operation Manual
STI Universal Sensor
Model: STI-34401
Operation:
Magnetic Sensor:
• Alert Signal – Magnet is over 1-1/2” from the “►“ shape. (typically)
• Restore Signal – Magnet is brought within 1-1/4” from the “►“ shape. (typically)
Tilt Sensor:
• Alert Signal – Sensor is tilted more than 45° from vertical.
• Restore Signal – Sensor is tilted less than 45° from vertical.
Ext. Sensor Input:
• Alert Signal – Terminals must first have a short circuit then an open circuit any
time afterward will trigger an Alert signal.
• Restore Signal – Terminals have a short circuit.
NOTE: An Alert or Restore signal must be triggered for an STI receiver to
acknowledge any one of the 3 Sensor Configurations.
Sensor Trouble Detection:
If the STI Universal Sensor has a Low Battery or triggered Tamper Switch, the
sensor will send a trouble signal to the receiver. If there is a Loss of
Communication with the receiver, the receiver also will indicate a trouble
condition with that device.
IMPORTANT NOTICE:
Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference that may be received, including interference
that may cause undesired operation.
Model: 34401
FCC ID: TXL34401
IC: 6550A-34401
This product meets the applicable Industry Canada technical specifications.
Le présent materiel est conforme aux specifications techniques applicables d’Industrie
Canada.