UCIT Series User’s Manual UCIT Series Mobile DVR User’s Manual 4-Channel Industry-Grade HD Mobile DVR Integrating 3G, Wi-Fi, GPS and Voice Conversation V2.
UCIT Series User’s Manual Contents 1. Product Introduction ......................................................................................................................4 1.1. Overview .............................................................................................................................5 1.2. Specifications ......................................................................................................................5 1.2.1. Specifications .............................
UCIT Series User’s Manual 4.7.8. Serial Ports Management .......................................................................................31 4.8. Shortcuts Keys ..................................................................................................................32 4.8.1. F1 Status Menu ......................................................................................................32 4.8.2. F2 Status Menu (No status menu is shown by pressing F2) .................................
UCIT Series User’s Manual 1. Product Introduction 1.1. Overview UCIT series is a high-end Mobile DVR (MDVR) dedicated for mobile surveillance of your fleet, applying high-speed processor and embedded operating system integrating various state-ofthe-art technologies. Features include audio/video codec technologies, large-capacity hard drive storage technologies, streaming media network technologies.
UCIT Series User’s Manual 1.2. UCIT Technical Overview 1.2.1. Specifications Item Description OS Linux Graphical User Interface (GUI) System parameters can be modified through an external display and included remote controller Security Management Two Level management for user password, administrator password, supporting encrypted transmission Video Audio Recording Alarm Input/Output 4-channel video input, 1channel video output; 1.
UCIT Series User’s Manual PTZ Control Supporting PTZ control realized by local ad client software; Parameter Configuration Supporting parameter configuration functions for mobile DVR coding channel; G-Sensor Embedded Accelerometer Power Operating Environment Input Voltage 8VDC - 36VDC Output Voltage +12V@4*0.5A; +5V@0.5A Power Consumption <10W in normal operation; <0.
UCIT Series User’s Manual 2.
UCIT Series User’s Manual 2.1. Front Panel Definitions 2.1.1. LED Indicator [PWR]Power Indicator Solid: Unit is powered on [ALM]Alarm indicator.
UCIT Series User’s Manual 2.2. Rear Panel Definitions ● ● ● ● ● ● ● ● [PWR]Power Supply Harness. [GPS]GPS Antenna Harness. [EXTEND I/O]Alarm Input/Output Harness. [RJ45]Network interface. [AV IN]Audio/video input interface. [AV OUT]Audio/video output interface. [WI-FI]WiFi Antenna Connection. [3G]3G Antenna Connection. 2.3. Cable Harnesses 2.3.1.
UCIT Series User’s Manual 2.3.2. Audio/Video Input/Output Cables Left Right Left: Audio/Video Input/Output Cable Right: Tie line. Interface Name Description Video Input VID1-VID4 Camera Input Audio/video output AVOUT Audio/Video output 2.3.3. GPS Module GPS module antenna 2.3.4.
UCIT Series User’s Manual 2.3.5.
UCIT Series User’s Manual 2.4. Infrared Remote Controller Key Function Image Remote on. [LOGIN] Login to On Screen Display (OSD) [0-9] [0-9] keys: In the setting menus, the numeric keys are used for numerical input. During video playback, numbers 1-4 are used for switching between single windows of channels 1-4, number 5 is used for switching to synchronous playback of all 4 channels.
UCIT Series User’s Manual 3. Storage Media Installation and Replacement 3.1. Hard Drive Installation Step 1. Unlock the hard drive and remove the hard drive sled. Step 2. Remove the bolts (7 in total) as outlined below Remove 1 bolt on the back side of the enclosure Step 3. Install the shock pads Install the shock pads on both sides as outlined below.
UCIT Series User’s Manual Step 4. Install the rubber shock absorbing covers Mount the rubber shock absorbing covers on both sides of the SATA hard drive, with the side of the cover with the lug close to the PCB. Step 5. Close the enclosure and fasten the screws 3.2. SD Card Installation Open the hard drive lock with the key and remove the hard drive sled, then remove the 4 screws holding the SIM card cover. The SD card slot is shown in the figure below.
UCIT Series User’s Manual Remove the 3G module Insert the SD card 3.3. Antenna Installation Connections for Wi-Fi and 3G antennas are equipped on the back panel of the device.
UCIT Series User’s Manual 4. OSD Menu Overview 4.1.
UCIT Series User’s Manual 4.2. User Login Press Login on the remote, and enter password if configured (default admin password is 888888) LOGIN DEV ICE NO.:00000 USER NAME : user / admi n PASSWORD : ****** LOGIN CANCEL 4.3. Main Menu After login, you will be at the main menu consisting of: PLAYBACK, SYSTEM SET, SYSTEM INFO, MANAGE TOOL.
UCIT Series User’s Manual 4.4. Video Playback In the main menu, press the arrow keys to select the video to playback, and press [ENTER] to enter the REC SEARCH interface.
UCIT Series User’s Manual 4.5. System Setup In the main menu, press the arrow keys to select the SYSTEM SETUP menu, and press [ENTER] to enter the following SYSTEM SETUP menu. The setup menu consists of the following submenus: BASE SET, REC SET, POWER SET, ALARM SET, SECURITY, NETWORK. SYSTEM SETUP 4.5.1. Basic Setup This menu configures the identification parameters of the device.
UCIT Series User’s Manual 4.5.2. Record Setup This menu is for settings of recording parameters. Do not modify these settings without first contacting Safety Track Support.
UCIT Series User’s Manual On/off mode Always set to ACC mode. Delayed off This setting configures a delayed shutdown when switch power is lost. Delay time The delay time can be set between 5 and 240 minutes Timed on time Not Applicable Timed off time Not Applicable 2 4.5.4. Alarm Setup Set output parameters upon alarm.
UCIT Series User’s Manual GPS Overspeed GPS OVER SPEED THRESHOLD:60(0~999)(km/h) ENABLE:ON/OFF SAVE Threshold: 60km/h by default, adjustable within the range of 0~999. Press DEL to delete the original number and use numbers to enter new setting. Note: Only KM/H is supported at this time. For MPH, use calculator to translate to KM/H.
UCIT Series User’s Manual “Threshold”: Set values of X, Y and Z directions within the range of 0.00g--9.99g, press DEL to delete the original number and use numbers to enter new setting. A good baseline for settings is 3.00g for each axis. “Alarm Switch”: set whether to enable or disable G-sensor alarm, press [ENTER] to input. Alarm on: In the recording status, when any of the directions of X, Y and Z exceed the “Threshold”, the alarm recording and the alarm logs will be started.
UCIT Series User’s Manual 4.5.5. Security Setup Set login passwords SECURITY PASSWORD: ON/OFF USER PWD: ****** CONFIRM: ****** INPUT NOT SAME! ADMIN PWD: ****** CONFIRM : ****** SAVE NOTICE:PASSWORD IS 6 NUMBE RS! Password Set whether to enable the login password, and then press [ENTER] to input.
UCIT Series User’s Manual Local setup This setting should not be modified, as it is only used for LAN connections Center setup This setting tells the unit how to talk back to the back-end to facilitate streaming and should not be modified except under the direction of Safety Track Support. 3G Setup This setting tells the unit how to talk back to the back-end to facilitate streaming and should not be modified except under the direction of Safety Track Support.
UCIT Series User’s Manual 4.6. System Info This menu shows vital information of the device and should only be accessed for troubleshooting purposes. SYSTEM INFO FIRMWARE VER:V000001 HARDWARE VER:V0001 MCU VER:V000002 DEVICE SN:V000002 CAPACITY MEDIUM SD HDD TOTAL 7.3893GB REMAINING 486.0156MB 298.0530GB 724.5000MB 4.7. Management Tools In the main menu, press the arrow keys to select Management Tools menu and press [ENTER] to enter the following menu.
UCIT Series User’s Manual 4.7.1. Log Management The Log Management records events of startup and shutdown, GPS time correction, alarm moment, etc., including date, time and event name. LOG MANAGE START TIME:2011-05-27 00:00:00 END TIME:2011-05-27 23:59:59 DATE TIME SEARCH EVENT NAME 11/05/27 15:30:25 alarm in 1 11/05/27 16:10:37 alarm in 2 11/05/27 17:00:35 power on 11/05/27 17:30:56 alarm in FIRST UP DOWN 4 LAST 4.7.2.
UCIT Series User’s Manual Message Warning: Format SD card ? Yes No Message Warning: Format hard disk ? Yes No “Yes”: Start formatting the SD card or hard drive, press [ENTER] to input. “No”: Cancel formatting and return to the Management Tools menu.
UCIT Series User’s Manual 4.7.3. Factory Settings This restores factory settings of the device, and the settings of the system will restore the default settings. Message Warning: Default all settings? Yes No “Yes”: Restore factory settings. “No”: Return to the Management Tools menu. 4.7.4. Configuration Management Imports and exports configuration files.
UCIT Series User’s Manual 4.7.5. PTZ Management Not Used PTZ MANAGE CHANNEL:CH1 CH2 CH3 CH4 ADDRESS:1(0~255) 1(0~255) 1(0~255) 1(0~255) BAUDRATE:4 CHANNEL(600/1200/2400/4800/9600/ 19200/38400/57600/115200) PROTOCOL:4 CHANNEL ( Pelco_D/Pelco_P ) SAVE 4.7.6.
UCIT Series User’s Manual 4.7.7. System Upgrade SYSTEM UPGRADE CURRENT VER: T070801/T123000/V42201/V051011 UPGRADE TYPE: Uboot / Kernel / Rootfs / App /ALL UPGRADE FROM: SD /HDD UPGRADE 4.7.8.
UCIT Series User’s Manual 4.8. Shortcuts Keys 4.8.1. F1 Status Menu Press F1 with the remote controller, the video output display of the device will include the below parameters: Acceleration: X= -0.22g, Y= 0.31g, Z= -0.94g GPS module: No/Yes Longitude: 0/113°56. 4695 'E Latitude: 0/22°33.