Technical Specifications

Model SSM 4828
Walk-in Bath 48" long x 25" wide x 38" high
Soaking Tub, Jet Massage, Air Massage & Combo
Measurements for Roughing in SSM 4828
For Additional Assistance Call Safety Tubs® Customer Service Line : 1-877-304-2800
Notes: Tub is supported by the frame and five integrated adjustable feet, no additional support is required. Refer to installation instructions supplied with tub for additional
information. Fittings not included and must be ordered separately. Provide suitable reinforcement to sub floor for all supports.
Important: Dimensions of fixtures are nominal, may vary and are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
Listing Organization : IAPMO – USPC Plumbing Codes | ETL – INTERTEK SEMKO
Standards: Ul-1795 Hydromassage Bathtubs | ASME A112.19.7M Hydromassage Bathtubs | ASME A11219.8 Suction Fittings
ASME A112.19.15 Bathtub With Pressure Sealed Doors | ANSI Z 124.1.2 Plastic Bathtubs | IAPMO PS 33 Flexible Hose
CSA B-45.5 Canadian Plumbing Standards | CSA TIL MSE 26 Flexible Hose
MODEL ST-4828-L
WALK IN BATH TUB
HIGH GLOSS ACRYLIC SURFACE
NOTES:
TUB IS SUPPORTED BY THE FRAME AND FIVE
INTEGRATED ADJUSTABLE FEET, NO ADDITIONAL
SUPPORT IS REQUIRED.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED
WITH TUB FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED
SEPARATELY
PROVIDE SUITABLE REINFORCEMENT TO SUB FLOOR
FOR ALL SUPPORTS
IMPORTANT
Dimensions of fixtures are nominal, may vary and are subject to
change or cancellation. No responsibility is assumed for use of
superseded or vaided leaflet.
8-09
37-1/2"
8"
16"
16-1/2"
Seat Height
17"
29-1/2"
Rough
Floor
2"
2"
39-1/2"
48"
14-1/4"
10"
28"
22-1/2"
15"
2"
16"
5-1/4"
21-1/2"
3
GENERAL SPECIFICATIONS
INSTALLED SIZE
48 x 28 x 38 In. (1219 x 711 x 965 mm)
WEIGHT
150 Lbs. (68 kg)
WEIGHT w/ WATER
528 Lbs. (238 kg)
OPERATING GAL
45 Gal. (170 L.)
FLOOR LOADING (PROJECTED AREA)
56 Lbs/Sq. Ft (275 Kgs/Sq. m.)
38”