Installation Instructions

OWNERS MANUAL
16
been created by this modification. Seek the help of a qualified professional.
11. DO NOT use bubble bath or Epsom salts when any pumps are operating. Bath oils may be used;
however, their use will require more frequent purging and cleaning of the whirlpool and/or air spa
systems.
12. Both whirlpool and air spa systems are designed so that water will drain from the plumbing after each
use.
13. There are no user-serviceable parts located under the tub.
PURGE CYCLE
All air blowers are equipped with a purge cycle to remove residual water from the lines. The purge cycle will
begin approximately 20 minutes after the unit is initially turned off and will continue for several minutes. Do
not be alarmed when the cycle begins.
IN-LINE HEATERS
If your bathtub is equipped with an optional in-line heater it will operate only when the pump is on. Note: the
in-line heater is designed to keep your water warmer longer but is not designed to increase the water
temperature. Heat settings are not adjustable.