Product Manual A

u SAFETY BOOT GUARDRAIL SYSTEM u
enables the builder to easily construct freestanding guardrail and stair rail systems that meet OSHA
Standards on every job-site, even when using different employees or subcontractors.
Use the Supplied Drill Adapter with a Power Drill and Socket for Fast and Easy Installation
OSHA STANDARDS REQUIRE THAT ENGINEERING TEST DATA CERTIFICATION MUST BE AVAILABLE
for the OSHA Compliance Officer
on all temporary guardrail systems (including job-built railings).
[Subpart M — Appendix B]
SEE INSIDE FOR DETAILED ILLUSTRATIONS
AND STRESS ENGINEERING REPORT SUMMARY
For Technical Support or to Reorder,
Call Toll Free 1.800.804.4741
www.safetyboot.com u [e-mail]
© 2017 SAFETY MAKER, INC.
P.O. Box 880 u Cypress, Texas 77410.0880
Phone [phone] or 800.804.4741 u Fax [phone] or 800.914.8019
HOIST AREAS
Each employee in a hoist area shall be protected from falling 6 feet (1.8 m) or more to lower levels by
guardrail systems or personal fall arrest systems. If guardrail systems, (or chain, gate, or guardrail) or
portions thereof, are removed to facilitate the hoisting operation (e.g., during landing of materials),
and an employee must lean through the access opening (to receive or guide equipment and materials,
for example), that employee shall be protected from fall hazards by a personal fall arrest system.
[§1926.501(b)(3) Duty to have fall protection]
THE GENERAL / PRIME CONTRACTOR IS RESPONSIBLE
for assembling to OSHA standards, all of the various temporary railing systems mandated for different workplace situations.
u ADDITIONAL INFORMATION u