Specifications

2 PARAMETER
2-88
Classification
USER
Display title
LINE/FACE/3D
Address Meaning Description
Effective removal allowance (upper limit) of
automatic corner overriding
Program type M
Conditions Immediate
E23
Unit 1%
Setting range 1 to 99
Effective removal allowance (lower limit) of
automatic corner overriding
Program type M
Conditions Immediate
E24
Unit 1%
Setting range 1 to 99
The range of removal allowances (upper and lower limits)
The automatic corner overriding becomes valid when the following line- or
face-machining conditions are met:
Tool
diameter
×
E24
100
≤≤
Removal
allowance
Tool
diameter
×
E23
100
MPL039
Removal allowance
Effective angle (upper limit) of automatic
corner overriding
Program type M
Conditions Immediate
E25
Unit 1°
Setting range 1 to 179
The shape angle range (upper limit)
The automatic corner overriding becomes valid when the following line- or
face-machining conditions are met:
Shape angle
≤ E25
MPL040
Shape angle
Calculation coefficient for the finishing feed
of line milling
Program type M
Conditions Immediate
E26
Unit %
Setting range 0 to 999
Axial feed rate calculation parameter for a line milling finish.
Set the changing ratio of the axial feed rate with respect to the radial feed
rate.
Axial feed rate = Radial feed rate ×
E26
100
Radial feed rate
Axial feed rate
Tool
Work-
p
iece
Machining Removal allowance
Line-rough machining
(
SRV-R
) – (
FIN-R
)
Face-rough machining
(
WID-R
)
Return to Library