Specifications

2 PARAMETER
2-90
Classification
USER
Display title
LINE/FACE/3D
Address Meaning Description
Radial clearance for wall attributes during
line machining
Program type M
Conditions Immediate
E30
Unit 0.1 mm/0.01 inch
Setting range —
An element that determines the starting point and escape point of radial
cutting when
CLOSED is specified for the wall attributes at the starting
point and ending point of open-pattern line machining.
When
OPEN is specified, E2 is used.
<CLOSED specified>
E30E30
<OPEN specified>
E2
E2
Element that determines the amount of
OPEN attribute wall protrusion for pocket-
machining shape units
Program type M
Conditions Immediate
E31
Unit 10%
Setting range 0 to 9
Element that determines the amount of
OPEN attribute wall protrusion in
pocket-machining shape units (
POCKET, PCKT MT or PCKT VLY unit
only)
Protrusion
Protrusion
OPEN attribute wall
CLOSED attribute
Protrusion
CLOSED attribute wall =
Tool dia. (Note) ×
E31
10
Note:
Nominal tool diameter in the tool sequence is used when tool data is
absent.
Return to Library